Moin Moin
Es ist ja wieder Winter und im Winter beginnt bei mir die Planphase für Folgeprojekte :
Was ich für 2014 plane ist die Umsetzung eines knuffigen Racers aus den 1930iger Jahren
im Masstab 1-1,5 oder 75% von der originalgröße !
Da ich mit der Ultimate und dem Stingray werscheinlich früher
fertig werde als geplant habe ich die Planung etwas vorgezogen :mrgreen:
hier ist das Flugzeug über das ich rede :
Auszug aus Wikipedia :
ZitatAlles anzeigenThe Chester Goon aka The Chester Special #2 was a single engine taildragger configuration monoplane racer built for the 1938 National Air Races.
Design and development
Art Chester followed on his successful air racer the "Jeep"" with the Goon. "Goon", like "Jeep" was named after characters in Popeye cartoons.
The Goon was built with a conventional welded steel tube frame and fabric covering. The wings used spruce spars and plywood covering. The mid-wing taildragger aircraft featured short-legged retractable landing gear. The engine was prepared to turn clockwise in anticipation of mounting a custom French propeller, but the propeller was also customized for American engines, and the engine needed to be modified again to rotate normally.[1]
During the 1956 rebuild, a 190 hp Lycoming O-435-1 engine was installed in place of the Menasco, including a cut down Beech-Roby propeller and wheel brakes.
Operational history
- 1938 Placed second in the Greeve Trophy Races of the National Air Races with a speed of 250.42 mph (403 km/h).
- 1938 Thompson Trophy - Has to drop out after failure of prop.
- 1939 National Air Races - First place at 263.39 mph (424 km/h), winning $9000.[2]
- 1939 Thompson Trophy - Dropped out with engine trouble.
In 1939 20th Century Fox featured the Goon in the movie series Tailspin Tommy. By 1956, the was Goon purchased in unflyable condition. On December 23, 1957 the rebuilt Goon was test flown by Harvey Mace at Sacramento, California.[3]
The Goon was purchased in 1991 by the Crawford Auto-Aviation Museum and was awaiting restoration in Macedonia,Ohio.[4]
Specifications (Chester Goon)
Data from EAA
General characteristics
- Crew: One
- Length: 20 ft 6 in (6.25 m)
- Wingspan: 18 ft 6 in (5.64 m)
- Powerplant: 1 × Menasco C-6-S Buccaneer Inline six cylnder, 450 hp (340 kW)
- Propellers: 2-bladed French Ratier Controllable
Einen Kanidaten für den Motor habe ich auch schon ins auge gefasst :
http://www.limflug.de/de/products/engines-15kw-40kw.php
(Ist die 37KW Variante)
Ich überarbeite gerade Pläne eines kleineren Modells :
http://jan-herzog.net/app/download/5785564934/Goon.pdf
Der Rumpfquerschnitt am Motorspannt beträt etwa 70x100cm^^
Das Abfluggewicht wird soo etwa 75-90Kg betragen . . . . das ist kein Witz :mrgreen:
Ich halte euch was die Planung angeht auf dem Laufenden !