Traxxas E-Revo bashen

  • Hallo,


    ich habe mir einen E-Revo Brushless Edition gekauft.


    Da ich dasd Fahrzeug hauptsächlich zum bashen nutzen möchte, würde ich gerne wissen welche Rocker ich am besten verbauen sollte. Ein bischen höher würde ich ihn auch gerne legen. Momentan sind standartmäßig die P2 verbaut.


    Welche Rocker würdet ihr empfehlen? Die P2 und die Anlenkungsstangen in das innere Loch am Querlenker damit er höher kommt, oder die LT-Rocker?


    Oder die P2 mit den härteren Federn die eigentlich für dei LT dabei liegen?


    Rein theoretisch müßten ja die LT am besten zum bashen geeignet sein da sie mehr Federweg ermöglichen, aber vielleicht denke ich auch falsch...


    Vielen dank im vorraus.


    Gruß Sascha

  • AW: Traxxas E-Revo bashen


    Ich bashe auch und habe die großen rocker drinne :daumen:

    Fuhrpark
    Tuning BAJA!! 1:5
    :cool:(früher mal Rovan)
    Traxxas E Revo brushless edition 1:8 - bestes überhaupt:yes: mit: 2xTeamOrion Rocket Pack LiPo 5000mah IBS 30C 7,4V; Alu-Tuning
    Mein Einstiegsmodell: Tamiya Levant XB Pro (steht nur rum)

  • AW: Traxxas E-Revo bashen


    Ich habe jetzt die P1 Rockers mit den Standard-Schubstangen verbaut. MIr ist aufgefallen das der Wagen gar nicht bis auf den Boden runtergdrückt werden kann. Ca. 5mm vorher ist Schluß, weil die Stoßdämpfer ganz eingefedert sind. Eigentlich sollte das Cahssis doch bis zum Boden durchschlagen können damitz nix kaputt geht oder? ( Bei hohen Sprüngen etc.)


    Gruß


    Sascha

  • AW: Traxxas E-Revo bashen


    Bei den Pushrods waren Stock die blauen Spacers drinnen. Könnte es daran liegen das er nicht mehr bis aufs Chassi durchfedert? Muss man die für die P1 Rocker rausnehmen?


    Gruß


    Sascha

  • AW: Traxxas E-Revo bashen


    P1 ist das beiliegende LONG TRAVEL KIT???
    Wenn du an der Befestigung der Schubstangen nix veränder hast(mittleres Loch) sollte das nicht sein.

    Fuhrpark
    Tuning BAJA!! 1:5
    :cool:(früher mal Rovan)
    Traxxas E Revo brushless edition 1:8 - bestes überhaupt:yes: mit: 2xTeamOrion Rocket Pack LiPo 5000mah IBS 30C 7,4V; Alu-Tuning
    Mein Einstiegsmodell: Tamiya Levant XB Pro (steht nur rum)

  • AW: Traxxas E-Revo bashen


    ah hier weiter unten steht dass die P1 standard sind:
    http://traxxas.com/node/89072

    Zitat

    P1 Rockers (standard) - For rough terrain use such as rocks, curbs, branches, and tracks with jagged and uneven surfaces. This is the rocker set best suited for the roughest tracks out there. The long travel rockers can also be used for extreme conditions, but they do not handle jump landings as well as the P1 rockers. Use the P1\'s for really rough tracks.
    P2 Rockers (#5358) - This is my favorite rocker set for most racing conditions. The P2 rocker set combines just the right amount of progressiveness for quick response on the technical sections of a track, without sacrificing the suspension\'s ability to handle the rougher sections. The P2\'s are the most well-rounded rockers for the majority of today\'s nitro off-road racetracks.
    P3 Rockers (#5359) -The P3 rockers work extremely well on smooth tracks with smaller jumps. Small tracks with tight turns will appreciate the quick response delivered by these rockers. Be careful about changing track conditions, and keep a close check on the track\'s surface throughout the course of the day to see if the surface becomes pitted and broken up. If this happens, it would be advisable to switch back to P2 rockers. Use the P3\'s for smooth high-bite tracks.
    LT (long travel) Rockers (standard) - I haven\'t really found a rough enough track condition that the P1 rockers couldn\'t handle. The LT rockers offer an insane amount of travel and plushness that works best on super chunky surfaces like those found at a construction site. The LT rockers lack the progressive bump handling traits of the 90mm rockers sets, which makes them a little more sluggish in the corners, and jump landings can be pretty harsh if landing from anything larger than a medium-sized jump. This is not to say that they won\'t work well for you on the track, but I prefer a more progressive feel to the suspension. I would stick to bashing and rock climbing with the LT rockers.
    Note that the LT rockers can be used for jumping, but require much heavier shock fluids to soak up the landings. These thick fluids are generally not ideal for track use.

    Fuhrpark
    Tuning BAJA!! 1:5
    :cool:(früher mal Rovan)
    Traxxas E Revo brushless edition 1:8 - bestes überhaupt:yes: mit: 2xTeamOrion Rocket Pack LiPo 5000mah IBS 30C 7,4V; Alu-Tuning
    Mein Einstiegsmodell: Tamiya Levant XB Pro (steht nur rum)

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!